featured

Principle

1.Malaria Plasmodium Falciparum (P.f.) Rapid Test Device/Strip

The Malaria P.f. Rapid Test Strip (Whole Blood) is a rapid chromatographic immunoassay for the qualitative detection of circulating plasmodium falciparum in whole blood.

2.Malaria P.f./P.v. Rapid Test Device

The Malaria P.f./P.v. Rapid Test Device (Whole Blood) is a rapid chromatographic immunoassay for the qualitative detection of two kinds of circulating Plasmodium falciparum (P.f.) and Plasmodium vivax (P.v.) in whole blood.

3.Malaria Pf/Pan Rapid Test Device

The Malaria Pf/Pan Rapid Test Device is a rapid chromatographic immunoassay for the qualitative detection of circulating antigens of Plasmodium falciparum, Plasmodium vivax, Plasmodium ovale, Plasmodium malariae in whole blood.

Directions For Use

Malaria Plasmodium Falciparum (P.f.) Rapid Test Device & Malaria P.f./P.v. Rapid Test Device

Allow the test device, specimen, buffer, and/or controls to equilibrate to room temperature (15‐30°C) prior to testing.
1. Remove the test device from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
2. Place the test device on a clean and level surface. Transfer the specimen by a pipette or a dropper: To use a Pipette: Transfer 5 μL of whole blood to specimen well of the test device, and then add 3 drops of buffer (approximately 180ul) to the buffer well, and start the timer.
To use a Disposable Specimen Dropper: Hold the dropper vertically; draw the specimen up to the Fill Line (approximately 5ul). Transfer the specimen to the specimen well, then add 3 drops of buffer (approximately 180ul) to the buffer well and start the timer. Wait for the colored line(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.
Malaria Plasmodium Falciparum (P.f.) Rapid Test Strip
Allow the test strip, specimen, buffer, and/or controls to equilibrate to room temperature
(15‐30°C) prior to testing.
1. Remove the test strip from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
2. Transfer the specimen to the specimen tube by a pipette or a dropper:
To use a Pipette: Transfer 10 μL of whole blood to the specimen tube, then add 3 full drops of buffer (approximately 120μL).
To use a Disposable Specimen Dropper: Hold the dropper vertically, draw the specimen up to the Fill Line as shown in illustration below (approximately 10L). Transfer the specimen to the specimen tube, then add 3 full drops of buffer (approximately 120μL).
3. With arrows pointing toward the specimen, immerse the test strip vertically in the specimen and start the timer. Do not pass the maximum line (MAX) on the test strip when immersing the strip.
4. Wait for the colored line(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.
Malaria Pf/Pan Rapid Test Device
Allow the test device, specimen, buffer, and/or controls to equilibrate to room temperature (15‐30°C)
prior to testing.
1. Remove the test device from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
2. Place the test device on a clean and level surface. Transfer the specimen by a pipette or a dropper:
To use a Pipette: Transfer 5 L of whole blood to specimen well of the test device, and then add 3 drops of buffer (approximately 180ul) to the buffer well, and start the timer.
To use a Disposable Specimen Dropper: Hold the dropper vertically; draw the specimen up to the Fill Line (approximately 5ul). Transfer the specimen to the specimen well, then add 3 drops of buffer (approximately 180ul) to the buffer well and start the timer.
3. Wait for the colored line(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.